Epoxy Flake Flooring in Gallatin, TN

How flake floors are made

A flake floor starts with a pigmented epoxy or polyaspartic base coat. While it is still wet, installers throw handfuls of colored vinyl chips across the surface until it is evenly covered. After the base cures, loose chips are scraped off and vacuumed, leaving a firmly embedded layer. A clear topcoat then seals the chips and creates the final wear surface. The finished floor looks like speckled granite and has a light texture underfoot.

Why people choose flake

Flake hides a lot. Dust, tire scuffs, red clay, grass clippings and small surface flaws all disappear into the pattern, so the floor looks clean longer between washes. The texture adds grip, which matters on floors that get wet from boats, pets or boots. And because the chips add body to the system, a full broadcast floor is thicker and more impact resistant than a single color coat.

Where it works

• Garages and shops
• Mudrooms and laundry rooms
• Tack rooms and barn offices
• Basement utility areas
• Gyms and locker rooms
• Veterinary and grooming facilities

Preparation

Every flake floor we install starts with diamond grinding. Grinding opens the concrete so the primer can soak in and bond. We repair cracks and pits, remove old coatings, and in older outbuildings degrease oil and chemical residue. Moisture testing is a standard part of the job, and if readings are high we use a vapor-tolerant primer. A beautiful flake floor laid over a poorly prepared slab will peel just like any cheap kit.

Full or partial broadcast

A full broadcast covers the base completely for a dense look and maximum thickness. A partial broadcast scatters fewer chips over a solid color for a more minimal design. Full broadcast tends to suit working garages and shops; partial broadcast suits finished basements and rooms where you want the base color to show. We bring both kinds of samples.

Picking a blend

Blends range from cool grays to warm earth tones and bolder mixes with blue, red or green accents. Medium blends do the best job of hiding dirt. Chip size changes the look too: smaller chips read as a fine speckle, while larger chips look more like terrazzo. Seeing samples on your own floor, in your own light, is the best way to decide.

Topcoat options

We use polyaspartic or aliphatic urethane topcoats that resist UV yellowing and stand up to chemicals and abrasion. Texture can be tuned: a smoother topcoat cleans easily, while added aggregate improves traction in wet areas. Gloss or satin finishes are both available.

How long it lasts

A well-installed flake floor in a home garage lasts many years. When the topcoat eventually dulls in traffic lanes, it can be lightly sanded and recoated without starting over. In commercial spaces, lifespan depends on traffic and cleaning, and we set expectations clearly before work begins.

Care

Sweep or blow out grit, wash with warm water and a mild cleaner, and use a soft brush to clean the texture. Avoid strong acids and solvents. Protect the surface from sharp metal stands with pads.

Questions

Get flake samples

Request a free estimate and we will bring sample boards.

Kennels and grooming rooms

Pet owners and groomers like flake floors because they shrug off water and are easy to disinfect, and the texture keeps paws from sliding. Coved edges keep wash water off the walls.